PROJECTION FILM PROCESSING

In our standard projection film processing section, we would like to offer you a comprehensive insight into the basic standards and techniques of film processing.

Whether you are an experienced professional or just starting to familiarize yourself with the world of film processing, here you will find all the information you need to successfully implement your projects.

Processing types

Sheets are only welded, no further processing.

Model 0

Top edge with reinforcement (65 mm) and welded eyelets (inner diameter 12 mm) every 200 mm. The side edges are narrowly welded (40 mm). Bottom edge with 100 mm high pocket.

Model 1

Top and side edges with reinforcements (65 mm) and welded-in eyelets (inner diameter 12 mm) every 200 mm. Bottom edge with 100 mm high pocket.

Model 2

Reinforced all round (65 mm) and welded eyelets (inner diameter 12 mm) every 200 mm.

Model 3

Reinforced all round (65 mm) and press studs every 200 mm.

Model 4

Can be finished as per model 1 or 2 on request, with an additional bib on the lower edge.

Bib