ROLLER SCREEN RUNWAY
Functional complete systems for stationary front projections
The roller screen systems, including drive and projection surface, are ideal as permanently installed projection surfaces, with applications ranging from in-house presentations with a small screen surface for use in conference rooms to maximum screen formats of 500 x 400 cm for multifunctional halls. The systems are designed for both wall and ceiling mounting and are equipped with fabric-reinforced front projection screens.
The RUNWAY roller screen system is used for installations with projection formats of up to 500 x 400 cm and impresses with its excellent projection quality. Our standard versions in particular allow short delivery times and an excellent price-performance ratio.
- RUNWAY is available in a flame-retardant version in accordance with DIN 4102 B1, with a fabric-reinforced projection screen surface.
- The motor is mounted on the left as standard, the blind rolls backwards.
For permanently installed small formats
RUNWAY is a roller screen system in a closed protective box with a groove profile for small to medium picture formats*(Fig. 1*). The continuous groove profiles on the top of the protective box allow flexible installation.
- Optionally with self-roller, crank drive or internal tubular motor mounted on the left.
- Aluminium-steel construction with protective box made of extruded aluminium, powder-coated to RAL 9010, white*(Fig. 2*).
- Depending on the size, the shaft is made of an aluminium profile or precision steel tube (Fig.3).
- Specially designed bearings for maximum safety.
- Electromagnetically released disc brakes for smooth, precise stopping without overrun.
- Full braking force when switching off and after a power failure.
- Safety gear from 5 m width / 5 m height.
- Standardised screen sizes.
- Depending on version and size, PLANA or STRATO projection screen surface with luminance factor ß of approx. 1.0.
Assembly technology
Standard
- Supplied as standard for RUNWAY / 250 and 400 with QuickMount mounting brackets for wall or ceiling mounting. The bracket is mounted on the wall or ceiling in advance. The box is hooked in and fixed with clamping screws*(Fig. 1*).
- Supplied as standard for RUNWAY / 500 with universal mounting brackets for wall or ceiling mounting (Fig.2).
Optional
- Mounting set especially for suspended ceilings with threaded rods for stepless adjustment to the ceiling level (Fig.3).
- Plug-in side panel brackets for installation/removal without opening the ceiling. For fixed installation in suspended ceilings*(Fig. 4*).
- Wall or ceiling bracket: Mounting bracket with horizontal and vertical adjustment options (Fig.5).
- Ceiling bracket: Sliding mounting bracket for ceiling mounting (Fig.6).
- Wall bracket: Sliding mounting bracket for wall mounting (without picture).
Crank drive or self-rolling mechanism
Crank drive
Our projection screens up to 300 x 300 cm are also available with a crank drive. The crank is included in the scope of delivery, length 148 or 167 cm, depending on the screen size. Please note the following points:
Projection screens
Our RUNWAY is equipped with either a PLANA or STRATO projection surface, depending on the requirements and format. The PLANA screen surface is somewhat thinner and therefore allows a somewhat smaller design for formats up to 240 cm wide. From a width of 240 cm, the STRATO fabric is mainly used.
Scope of delivery
- Roll-up screen including weighting profile.
- Two mounting brackets.
- For motorised projection screens: Connection cable, length approx. 250 cm. For crank drive: crank, length 148 or 167 cm.
- Operating instructions.
Protective box 9.5 x 8.5 cm
Dimensions of the projection screens
- Our projection screens are supplied with QuickMount mounting brackets*(Fig. 1*).
- Special formats of our projection screens on request.
- Dimensions refer to installation with QuickMount mounting brackets.
- The motor is mounted on the left as standard, the blind rolls backwards.
- Roll-up screen also available with video screen (normally flammable to DIN 4102 B2).
Protective box: 12.5 x 12.0 cm
Dimensions of the projection screens
- Our projection screens are supplied with QuickMount mounting brackets*(Fig. 1*).
- Special formats of our projection screens on request.
- Dimensions refer to installation with QuickMount mounting brackets.
- The motor is mounted on the left as standard, the blind rolls backwards.
- Roll-up screen also available with video screen (normally flammable to DIN 4102 B2).
Protective box 16.0 x 16.0 cm
- Our projection screens are supplied with universal mounting brackets*(Fig. 1*).
- Special formats of our projection screens on request.
- Dimensions refer to installation with universal mounting brackets.
- The motor is mounted on the left as standard, the screen rolls backwards.
- Roll-up screen also available with video screen (normally flammable to DIN 4102 B2).
RUNWAY TAB TENSION
Details
Two adjustable lateral rubber cords are guided through tabs. This ensures a continuous lateral tension that stretches the entire projection surface perfectly flat.
Available projection screens:- White front projection screen, fire protection class NF P 92-507 - M1
- Projection screen film white micro-perforated, fire protection class DIN 4102 B1
- Projection screen film grey, fire protection class NF P 92-507 - M2
- Front projection screen film silver-grey, without fire protection class
- Rear projection screen grey, without fire protection class
Protective boxes with mounting bracket for wall and ceiling mounting.
125 x 120 mm with QuickMount mounting bracket or standard mounting bracket.
160 x 160 mm with standard mounting bracket.
Formats and special formats on request.
The motor is mounted on the left as standard, the blind rolls backwards.
Roller screen front projection is supplied with video edge as standard.
Roller screen rear projection only possible up to max. 2.0 m image size in height, without video border.
